|
|
|
|
|
|
HomeElectronicsAccessories & SuppliesComputer AccessoriesCables & InterconnectsDigital Optical (Toslink) Female / Female Gender Changer / Coupler |
|
|  | | | Customer Reviews: | | | Average Customer Review: ( 9 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
2 of 2 found the following review helpful:
Handy little item Nov 10, 2011
By Blue Screen
These little guys do exactly what they say they do... they let you join two Toslink cables to make effectively one longer Toslink cable. I used it for ADAT (which uses the same Toslink cables as S/PDIF) and they were brilliant.
1 of 1 found the following review helpful:
Works as it should Dec 16, 2011
By Juls of Antelope
It works as it should. Tight hold on the cables but still pretty easy to uncouple. Product is small and light.
Great little fiber optical cable connectors May 03, 2012
By Timothy Mc
These connectors allow two fiber optical cables to be connected. There appears to be a gold plated tube in the center of these connectors that the ends of the fiber optical cables slip into. The connector holds the end of one cable up next to the end of the other while blocking any light from entering the connector. There is nothing to interfere with the signal being relayed from the source to the receiver. The connector seems to hold each cable securely. I have five optical sources but my receiver only has three optical receptacles. I ordered a couple of these and a couple of extra cables in order to be able to easily and cheaply switch from one source to another without having to continually access the rear of my amplifier. The one that I am using works great.
Works great Apr 22, 2012
By 350ZMO
For joining two toslink cables together. The price is right and they work perfectly. I had made my own from a wood block until these showed up. The home made was finicky. This was not.
works great for extending toslink signals Apr 08, 2012
By Christopher A. Wilson
Works exactly as advertised. I needed an extra 6 inches of toslink cable when connecting my flat panel TV to my A/V tuner digitally. I have my TV connected to both over the air signals and the cable box and it is part of an entertainment system with surround sound, so in order to hear dolby digital signals over the surround sound I had to connect the digital "out" from my TV to the digital "in" on my A/V tuner via toslink, well I have a 12 foot run of toslink cable in the wall to do this and came up short, these couplers did the trick and allowed me to put a jumper in to get that last 6 inches or so. Sound is great no problems.
See all 9 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
